ESI ProCAST v2014.0 & Visual Envir- onment v9.6 for Win64 [2014, ENG + FRA]

[Only registered and activated users can see links. ]

ESI ProCAST v2014.0 & Visual Envir- onment v9.6 for Win64 [2014, ENG + FRA] | 1.64 GB


ProCAST ProCAST software package allows us to solve almost any technological problems associated with casting metal! ProCAST allows you to simulate any casting technology: is any gravity casting (permanent mold casting, and in ASG XTC, investment casting, etc.); die-cast under controlled pressure (high pressure die casting, low-pressure casting, molding with a counterpressure casting and vacuum suction, etc.); -tsentrobezhnoe casting; -continuous casting; die-cast on gasified models. ProCAST program allows you to define: -distribution of thermal fields in the casting and form; -otsenit level of the stresses in the casting and metal snap -allows count cyclic loading (eg injection molding). ProCAST meets the challenges of the production is based on proven finite element technology, ProCAST is a complete solution that covers a wide range of casting metals and alloys. Covering all production tasks for a wide range of casting processes. Casting into the ground, gravity, inclined casting Key success factors in the gravity casting associated with the optimization of runner system and except for areas possible shrinkage. Casting investment casting, shell casting foundry ProCAST well suited for solving the problem of lost-wax casting. For example, ProCAST can automatically generate a mesh, reflective shell mold, allows for uniform thickness and layering. This takes into account thermal radiation from shadowing effects, which are important for high-temperature alloys. ProCAST allows for simulation of mold filling, solidification and microstructure formation. Location risers and the use of insulating or exothermic inlets, their influence on the shrinkage can be studied on a computer and visualized on the screen for **** casting.

Casting into the chill mold under low pressure to actually reproduce the conditions of the factory can carry out simulation cycles form to a state where the temperature conditions will be released in the stationary regime. The calculated temperature fields allow to calculate the mold filling and solidification of the casting. process parameters can be adjusted so that it has reached an optimal quality of the process in the shortest possible time. Casting into the chill mold under high pressure ProCAST allows to solve specific problems such high pressure die casting as a liquid stamping and molding semisolid phase. Optimal piston velocity profiles, gating designs and overflow can be easily identified in the process of modeling, even very thin walled structures. Thermomechanical cycles die can be calculated not only to increase its life cycle, but also to increase productivity, thereby reducing risks and costs. Visual-Environment -Visual Environment- an integrated suite of pre-and post-processor that can operate simultaneously or individually in- overall environment of other products ESI Group. Visual-Environment allows you to prepare the model to the calculation of both programs from ESI Groupe, and for CAE-CFD prgogramm from other manufacturers Visual-Mesh is A Complete Meshing tool Which Supports CAD Import, 2D and 3D Meshing and Editing features. Some of the features Which work on 'mesh Only' will be available in Visual-Crash PAM context. Visual-Crash PAM (VCP), Which is one of the contexts in Visual-Environment, PAM-CRASH Provides users with fast iteration and rapid Revision Process model, from Data input to visualization for crashworthiness simulation and design. This Environment Provides quick model browsing, advanced mesh editing capabilities and rapid graphical assembly of system Models. VCP Allows graphical creation, modification and deletion of contacts, Materials, constraints, control cards and all crash Entities. In VCP, you are Provided with tools for checking model quality and simulation parameters Prior to launching Calculations with the Solver. Using These tools helps in Correcting errors and Fine-Tuning the model and simulation Before Submitting it to A solver, THUS saving time and resources. Visual-Safe is A context in Visual-Environment, Dedicated to Safety utilities. High productivity tools such as advanced Dummy Positioning, seat Morphing, Fitting belt and airbag folding are Provided in this context. Visual-Safe MAD (VSM) is A Complete, efficient and Productive CAE Environment for multi-body and Finite element occupant safety Simulations using Madymo. It utilizes the multi-window / multi-model / multi-Application Environment of Visual-Environment very Efficiently. It Provides Complete flexibility of working for both the Experienced and the Novice users Madymo Alike. It incorporates A vast database of Customer Requirements and Feedback Gathered over A Decade. Visual-Medysa Guides PAM-MEDYSA 2G users in Building Models for system design optimization and performance validation of complex mechanical Systems. Mechanical Systems such as Engine, tires, Chassis, Suspensions, and machinery transmissions, can be modeled with ease in this Environment. High Velocity Impact (HVI) simulation is USED to analyze the Dynamic Behavior of Materials Under High Speed ??very Impacts. Visual-HVI Supports PAM -SHOCK HVI User Modeling in such material Data Easily. Typically this Finds applications in Aerospace WHERE we need to Understand the Damage Suffered by A Spacecraft When it encounters Space debris, such as Micro-meteoroids. Visual-Viewer is the New generation Post Processing tool with State-of-art Plotting utility. This caters to the requirements of the CAE community. Visual-Viewer is Built on the multi Page / multiplot Environment, Which Enables the User to Group Data into His Pages and plots. Visual-Viewer is designed with sleek and Intuitive User interface with Windows Look and feel. Complete Session can be Re-Run without any loss of Data. Visual-Viewer is completely command driven Which Enables the User to execute commands at ease. Visual-Viewer is completely Built on multi-Page and multi-Plot Environment. The user has the freedom to create any number of pages and to have upto 16 windows in a single page. These windows can be Plot, animation, video, model or drawing block windows. The Entire Snapshot of the Product can be Saved as A template and restored any time. Visual-Process Executive's Process-oriented philosophy Brings A compelling advantage to PAM-CRASH users to build Processes Quickly by Customizing GUIs and to execute Them. Visual-Crash Dyna (VCD) Provides advanced capability and fast-Guided model of Building LS-DYNA solver. Using Visual-Environment multi-window / multimodels / multi-Application Environment, with Visual verification, model Complete Building Activity can be Performed Efficiently. Visual-Seal Provides advanced capability and fast-Guided Building model of Seal model. Using the Visual-Environment multi-window / multi-model / multi-Application Environment, with Visual verification, Complete model-Building Activity can be Performed Efficiently. Visual-Life Nastran (VLN) is A Comprehensive, integrated Environment for Nastran Simulations with powerful enterprise capabilities. VLN is A 'High-performance' Software to manage and Assemble large and complex Finite element system Models for Nastran, NVH and Durability analysis with ITS Unique multi-window / multi model Environment providing High productivity with powerful visualization and model browsing. Visual-Crash Rad (VCR) Provides advanced capability and fast-Guided model of RADIOSS solver Building. Using Visual-Environment multi-window / multimodels / multi-Application Environment, with Visual verification, model Complete Building Activity can be Performed Efficiently.

System requirements : Pentium IV 3 GHz or Higher Memory (RAM): 1024 MB or higher Additional information : ATTENTION! ProCAST 2014 is only a set of Win64 solvers without its own GUI, pre-and post-processor load CAD-model to the calculation of its preparation, the launch of solvers and viewing the results is carried out only from the interface ESI Visual-Environment> Visual CAST By default ProCAST 2014 requires ESI Visual-Environment v9.6, but you can connect ProCAST 2014 and ESI Visual-Environment v9.0.x. About how to do this read in readme.txt crowbar ProCAST 2014.0



DOWNLOAD LINKS:

Code:
http://u19822771.letitbit.net/download/02833.0d5895763f0108ffe48d122f7176/ESI_ProCAST_2014.0___Visual-Environment_9.6_Win64_SSQ.part1.rar.html
http://u19822771.letitbit.net/download/56540.555ff7cff09e2318efef20cf02ec/ESI_ProCAST_2014.0___Visual-Environment_9.6_Win64_SSQ.part2.rar.html
http://u19822771.letitbit.net/download/25496.2d2291ff4a71e7790ca9bc4d858f/ESI_ProCAST_2014.0___Visual-Environment_9.6_Win64_SSQ.part3.rar.html
http://u19822771.letitbit.net/download/27051.219ec69ff44ebb9fe90eec38965f/ESI_ProCAST_2014.0___Visual-Environment_9.6_Win64_SSQ.part4.rar.html
http://u19822771.letitbit.net/download/32897.375269c33643f7985c9195ba9eb7/ESI_ProCAST_2014.0___Visual-Environment_9.6_Win64_SSQ.part5.rar.html

http://uploaded.net/file/7ihebv7i/ESI_ProCAST_2014.0_%26_Visual-Environment_9.6_Win64_SSQ.part1.rar
http://uploaded.net/file/q7qstp57/ESI_ProCAST_2014.0_%26_Visual-Environment_9.6_Win64_SSQ.part2.rar
http://uploaded.net/file/yihvt2an/ESI_ProCAST_2014.0_%26_Visual-Environment_9.6_Win64_SSQ.part3.rar
http://uploaded.net/file/9hwi4bgj/ESI_ProCAST_2014.0_%26_Visual-Environment_9.6_Win64_SSQ.part4.rar
http://uploaded.net/file/mmipdh2v/ESI_ProCAST_2014.0_%26_Visual-Environment_9.6_Win64_SSQ.part5.rar

http://rapidgator.net/file/30f91243eb38df4c8baf298801706fc8/ESI_ProCAST_2014.0_&_Visual-Environment_9.6_Win64_SSQ.part1.rar.html
http://rapidgator.net/file/72e798b30a3033d5dc1cf53c2201cf16/ESI_ProCAST_2014.0_&_Visual-Environment_9.6_Win64_SSQ.part2.rar.html
http://rapidgator.net/file/5e36160f30f3d79116115292cc5966a7/ESI_ProCAST_2014.0_&_Visual-Environment_9.6_Win64_SSQ.part3.rar.html
http://rapidgator.net/file/fe80abc31873cffc58f719108cab5700/ESI_ProCAST_2014.0_&_Visual-Environment_9.6_Win64_SSQ.part4.rar.html
http://rapidgator.net/file/9d64319f62663639975d1c7e19a43310/ESI_ProCAST_2014.0_&_Visual-Environment_9.6_Win64_SSQ.part5.rar.html

http://www.uploadable.ch/file/eVvS7RZyMHVW/ESI_ProCAST_2014.0_&_Visual-Environment_9.6_Win64_SSQ.part1.rar
http://www.uploadable.ch/file/EkyfvVdE8Cxj/ESI_ProCAST_2014.0_&_Visual-Environment_9.6_Win64_SSQ.part2.rar
http://www.uploadable.ch/file/GBwvKGPbpqYV/ESI_ProCAST_2014.0_&_Visual-Environment_9.6_Win64_SSQ.part3.rar
http://www.uploadable.ch/file/BYKbTQfbxbjf/ESI_ProCAST_2014.0_&_Visual-Environment_9.6_Win64_SSQ.part4.rar
http://www.uploadable.ch/file/mj9k5ADnHkn2/ESI_ProCAST_2014.0_&_Visual-Environment_9.6_Win64_SSQ.part5.rar