PDA

View Full Version : Zuken E3 Series 2015 v16.05 Update



bestsoft84
15-12-15, 02:08 AM
<b><font color=red>[Chỉ có thành viên mới xem link được. <a href="register.php"> Nhấp đây để đăng ký thành viên......</a>]</font></b>



Zuken E3 Series 2015 v16.05 Update | 403.0 Mb



Zuken, a global provider of leading-edge software and consulting services for electrical and electronic design and manufacturing, has released update of E3.Series 2015, is a scalable, easy-to-learn system for the design of wiring and control systems, hydraulics and pneumatics.

The out-of-the-box solution includes schematic (for circuit and fluid diagrams), cable (for advanced electrical and fluid design), panel (for cabinet and panel layout), and formboard (for 1:1 wiring harness manufacturing drawings). Integrated with MCAD, E3.series is a complete design engineering solution from concept through physical realization and manufacturing output.

Bugfix Build 16.05:
Designer-02351 Copying/Pasting block connectors only possible with single symbols
Designer-03949 DBE: Double-clicking with middle mouse button (Fit to Window) doesn't work in DBE mode
Designer-08516 Incorrect display of component name in 'Component Wizard' (following pages)
Designer-11032 Single terminal of database assembly is changed into terminal strip when assigning a symbol to the assembly
Designer-12349 Impossible to browse within the clipboard using the "Page up/down" keys
Designer-20556 When a symbol exists only with characteristics, the Symbol Properties' drop-down list also lists 'No Entry' for the symbol characteristics
Designer-23694 E3.CopyDatabaseEntries: Symbols referenced by components over attributes are not copied
Designer-24888 No connector pin terminal offered for selection if pin doesn't have name assigned
Designer-25348 When the setting "Use Higher level assignment and Location of sheet/field" is active, the system displays separators of IEC standard even if this is deactivated
Designer-25748 Columns are copied from the component list although they are hidden
Designer-25856 Preview symbols of components are not exported within the export of sub-circuits
Designer-27101 Nothing is filled within the connection target format when a plugged symbol is placed on the other end which displays several pins and when the setting 'Use plugged device as target' is active
Designer-27204 E3.DBE doesn't embed a DbeApplication-Object in the RuningObjectTable (ROT)
Designer-27206 When moving or importing sub-circuits, signals defined by the user may be changed at cross-reference
Designer-27242 Use automatic connector naming does not work for block connectors from the component database
Designer-27350 Lifecycles for Multiuser may receive names which consist of space characters only
Designer-27351 COM command tree.GetVisibleInfoTypes() returns selected views and formboards not correct
Designer-27361 Personal toolbar is inactive after full-screen-mode and cannot be activated manually until restart of E3
Designer-27404 When an attribute is used for autorouting in panel which is assigned to a signal and a cable duct, it is not considered when a wire is generated automatically at the same time
Designer-27416 COM: bundle.setid returns zero when a 'Twisted Pair' is part of a cable with component assignment
Designer-27430 Jumpers between terminals with variant position in Panel are not displayed although ''all variants'' has been selected
Designer-27474 The tooltip ''Change slots'' within the database editor at model editing is incorrect - 'Display slots' shall be used
Designer-27480 Some components placed in panel are visible behind the door in 2D
Designer-27485 The scaling is not rounded up to even values at XVL export
Designer-27492 E3.dbe may crash at Slave assignment
Designer-27495 Jumpers of terminals are not displayed in a terminal plan of an assembly
Designer-27497 Error 'E - Error in function OUTLINES, ret = 103' after copy and paste of a cutout at model editing within the database editor
Designer-27506 Changed texts are not updated in the sheet table
Designer-27507 Origin information is missing in the exported XVL data
Designer-27527 Connection target doesn't contain the connector insert name
Designer-27532 Display of context menu for graphic may lead to following error 'E - Error in Functioncircle_data(), ret = 3'
Designer-27533 E3.ReportScripts: Incorrect or wrong output of device designations of configurable connectors at default scripts cable list and connection list
Designer-27539 DXF/DWG Export of opaque texts has bigger space requirements
Designer-27548 E3.CutOut: Output of DXF in E3.CutOut should always appear without height information
Designer-27559 Despite using suffix modification, the equal sign is displayed at higher level assignment
Designer-27560 Open line ends are always displayed when calculation attributes are existing on node (eCheck)
Designer-27561 Columns in translation table are invisible, scrollbars don't appear
Designer-27565 E3.CopyDatabaseEntries: When several component versions are existing, they are incorrectly displayed or copied
Designer-27566 E3.Add-ons: No reaction of 'AddOns / Rename device' designation
Designer-27571 Import dialog doesn't react after direct entry of file name
Designer-27579 Wires from wire group don't inherit the new cross section at editing within DBE
Designer-27585 When placing the master symbol of a connector view, an incorrect symbol is used - consistency error 'E - CCID:001180: check_cell_device_link([xxx]): is linked to [xxx] but no pins are represented by this'
Designer-27598 The COM function 'ExtDoc.GetName' returns document name without extension at converted projects before E3 2012-1100
Designer-27599 Identic connection lines are displayed with different line width at DXF export
Designer-27610 'Jump'' command doesn't work for symbols with component assignment and without device designation
Designer-27616 When switching the options with inclusive / exclusive configuration, the result differs when ''Activate Online'' is on or off
Designer-27618 PDF-Export may have shifted symbols
Designer-27624 No ability to rename device within the device tree when the new name differs in upper and lower case
Designer-27644 Error messages may appear when updating symbols
Designer-27655 Connection Target Format 1 disappears after changing the pin name
Designer-27659 Exporting of only one of grouped sheets of hierarchical blocks as e3p file causes inconsistencies in new projects after import
Designer-27663 E3.CopyDatabaseEntries: Error when starting the E3.CopyDatabaseEntries at new installation without older version of E3 (32bit) on the computer: system.Dll Not found Exception: unable to load DLL 'CopyDatabase.dll': can't find module (Exception from HRESULT: 0x8007007E)
Designer-27664 Import of e3p generates double attribute indicators or conductor indicators and attribute indicators
Designer-27703 When terminal plan sheets are deleted in terminals which have been assigned to options, VARPTR are defective in project
Designer-27805 No ability to place BlockPinViews

About Zuken
Zuken is a global provider of leading-edge software and consulting services for electrical and electronic design and manufacturing. Founded in 1976, Zuken has the longest track record of technological innovation and financial stability in the electronic design automation (EDA) software industry. The company's extensive experience, technological expertise and agility, combine to create world-class software solutions. Zuken's transparent working practices and integrity in all aspects of business produce long-lasting and successful customer partnerships that make Zuken a reliable long-term business partner.

Zuken is focused on being a long-term innovation and growth partner. The security of choosing Zuken is further reinforced by the company's people-the foundation of Zuken's success. Coming from a wide range of industry sectors, specializing in many different disciplines and advanced technologies, Zuken's people relate to and understand each company's unique requirements.

Version: 2015 version 16.05 Update
Multilanguage
OS: Windows 7even / 8
System Requirements: Zuken E3.Series 2015



All Link Download :




<b><font color=red>[Chỉ có thành viên mới xem link được. <a href="register.php"> Nhấp đây để đăng ký thành viên......</a>]</font></b>
<b><font color=red>[Chỉ có thành viên mới xem link được. <a href="register.php"> Nhấp đây để đăng ký thành viên......</a>]</font></b>
<b><font color=red>[Chỉ có thành viên mới xem link được. <a href="register.php"> Nhấp đây để đăng ký thành viên......</a>]</font></b>
<b><font color=red>[Chỉ có thành viên mới xem link được. <a href="register.php"> Nhấp đây để đăng ký thành viên......</a>]</font></b>

<b><font color=red>[Chỉ có thành viên mới xem link được. <a href="register.php"> Nhấp đây để đăng ký thành viên......</a>]</font></b>
<b><font color=red>[Chỉ có thành viên mới xem link được. <a href="register.php"> Nhấp đây để đăng ký thành viên......</a>]</font></b>
<b><font color=red>[Chỉ có thành viên mới xem link được. <a href="register.php"> Nhấp đây để đăng ký thành viên......</a>]</font></b>
<b><font color=red>[Chỉ có thành viên mới xem link được. <a href="register.php"> Nhấp đây để đăng ký thành viên......</a>]</font></b>